2222 East Buck Road, Pennsburg, PA 18073

  215-327-1489  

      
                                       23 Years of Service & Sales                                        

TURRET PUNCHES AVAILABLE

NEW LISTING!

33 TON AMADA VIPROS 357 QUEEN TURRET PUNCH W/FANUC O4PC & PHNC CNC,
W/ASR6-410CR 6-SHELF LOAD/UNLOAD SYSTEM
INSTALLED NEW: FEBRUARY 2000

SPECIFICATIONS: 
TONNAGE RATE ............................ 33 TONS
TURRET STATIONS ......................... 58 STA. 
TOOL CAPACITY ........................... 58 STD., w/(2) A/I 
TOOL CHANGES -INTERNAL STATION-TO-STATION TURRET 
TOOL MAG ROTATION SPEED, RPM ........ 60 
ONE SET, EXTERNAL, MIN. / SEC MAX.
MAX HOLE DIAMETER ...................... 4.5" 
AUTO INDEX - 
NO. OF STATIONS ....................... 2 
ROTATION SPEED ........................ 60 RPM 
MAX. HOLE DIAMETER .................... 1.25" 
SPM, ACCURACY ON 2" CENTERS ............. 275 @ .315" 
RAM STROKE .. ± .004"
STROKES PER MINUTE, CONTOURS ............ 520 @ .315" 
RAM STROKE 
MAX. PARTING SPEED, IPM (PERIMETER PUNCHING) 3,229 
INDEXABLE FEED CLEARANCE ................... .787" 
WORK PIECE -
MAX. MATERIAL THICKNESS ........... .25" 
MAX. DIMENSIONS ................... 50" x 144" w/ONE REPO 
MAX. WEIGHT ....................... 220 LBS. 
THROAT DEPTH ........................ 50" 
TABLE TRAVEL DIMENSIONS ............. 50" x 72" 
LINEAR TABLE SPEED MAX., IPM ........ 3,228 DIAGONAL 
CONTROL ............................. FANUC 04PC 
DIMENSIONS ................. 181.1"L-R x 148.7"F-B x 88.4"H 
WEIGHT ..................... 29,700 LBS. 
EQUIPPED WITH: 
58 STATION TURRET WITH (2) AUTO INDEX 
(36) STA. 1/2" ,(12) STA. 1-1/4" ,(4) STA. 2" ,(2) STA. 3-1/2" ,(2) STA. 4-1/2" ,(2) A/I STA. 1-1/4"

AS6410 - Storage Loading Device 
The AS6410 is a six-shelf storage loading device typically suited to high-
variety, low-volume part runs. It can process 4' x 10' sheets with a sheet
loading time of 15 seconds. The system can handle material thickness of .135"
in mild steel and offers maximum tonnage of 4,400 lbs. per shelf. The self-
managed system spends more time per shift fabricating parts. It minimizes
inventory and provides continuous flow of material at each operation on a
Just-In-Time basis. It provides easy access to varied types and sizes of
material necessary for short and long runs. Vertical storage of material saves
space and time over the typical pallet and forklift method of operation. 


PRICE: $299,500.00

LOADERS!

CL510   5' X 10'                                                                                                 MP1530 .250" Capacity

ADDITIONAL MACHINES AVAILABLE

1996 Amada Virpos358 King 33 Ton, 58 Station Thick, 4 1/2" Auto Index Stations, Hydraulic Ram, Brush Table, Fanuc 04PC Control, Cycle Loader

1996 Amada Pega357 33 Ton, 50" Throat, 58 Station Thick, 2 Auto Index Stations, Wet Clutch, Fanuc 04PC, MP1225 Load/Unload

1995 Amada Pega357 33 Ton, 58 Station Thick, 2 Auto Index Stations, Wet Clutch, Fanuc 04PC, 6 Shelf Tower FMS 

1992 Amada Coma557, 55 Ton, 66 Station Thick, 2 Auto Index Stations, Wet Clutch, Fanuc 04PC, 
1992 Amada Coma567 55 Ton, 58 Station Thick, 2 Auto Index Stations, Wet Clutch, Fanuc 04PC
1991 Amada Pega244 22 Ton, 36 Station Thick, Fanuc 04PC, Hydraulic Clutch
1988 Amada Pega357, 33 Ton, 50" Throat, 58 Station Thick, 2 Auto Index Stations, Wet Clutch, Fanuc 04PC
1987 Amada Pega244 22 Ton, 24 Station Thick, 2 Auto Index Stations, Wet Clutch, Fanuc 6MB
1984 Amada Octo334 33 Ton, 30" Throat, 8 Station Thin, 1 Auto Index Station, Fanuc 6MB 

Send mail to jamman@comcast.net with questions or comments about this web site.
Copyright © 2004 CNC Fab Machines